Repairs to uPVC Windows

uPVC is a fantastic option for modern homes. They are durable, long-lasting and easy to maintain. In contrast to aluminium and timber, they are not susceptible to get rusty or decay.

Regularly cleaning and lubricating UPVC windows and doors is vital. This will help avoid unnecessary repair costs and increase energy efficiency.

1. Broken Glass

If the glass in your window is broken it can cause a great deal of damage to your home, making it extremely dangerous and possibly fatal. It is important to ensure that your windows are in good working order.

Single-pane windows are relatively simple to replace and generally fit into frames that were previously in use very easily. If you have double glazing repairs Marlow-paned windows which are held together by internal beading, it is more difficult to remove and replace the old panes. In this situation it is essential to buy plastic spacers to make sure that the new pane fits into the window frame.

If you're planning to attempt to remove the glass panes yourself, it is essential to wear the proper safety gear that includes gloves with a thick layer of material and protective eyewear. It is also recommended to lay down a drop cloth before you begin working on the window panes, so that any shards fall onto the fabric and window repairs Rochester not onto the floor, where they could be trampled under.

Once the glass is removed, it's a good idea to cover the gap with packaging tape or duct tape to stop water and drafts from entering the property until a professional comes out and fix the window. This will also act as a barrier, deterring any intruders from gaining entry to your home. If the gap is large, you may be interested in an alarm door that comes with an integrated window as it offers the best of both worlds.

2. Sagging

Upvc windows and doors are a low-cost energy-efficient, durable and long-lasting alternative to timber windows with sash. However, over time they are susceptible to a range of issues like sagging. A window that is sagging can cause problems with light, draughts or even security. It's crucial to act as soon as you notice your uPVC windows are falling down.

Repositioning the hinges can aid in fixing a window which is sagging. First, you'll need to open the windows so you can access the frame. Then, you can remove the hinges on the top and bottom with a screwdriver and adjust them clockwise or counter-clockwise. After you've repositioned the hinges, close the window and check for fitting. If you're satisfied with the fit, tighten the screws to ensure they stay in the right place.

If you are unable to reposition the hinges, you might need to replace the seal. Over time, rubber seals lose their elasticity and dry out, which causes their tightness to decrease. If this happens, it's crucial to replace the seal as fast as possible so that your uPVC windows remain watertight and draught-proof.

UPVC handles can also become loose. The majority of the time, this is caused by screws that have come loose over time. However, it can occur because the handle mechanism has been worn out. It's relatively simple to fix a loose uPVC handle. First, you'll need to close the window and then perform a test fitting. The corners of the sash should be aligned with the casing joint. If it doesn't, you can use the screwdriver to loosen up the handle. Then, turn the mechanism back into place.

3. Water Leaks

It is crucial to take action if awake each day to discover mouldy walls and wet floors. The leaks of water through windows could cause structural damage to your home and also hinder your ability to control the temperature inside your home. Most often, uPVC window leaks are caused by a damaged or missing sealant.

This is a relatively easy fix that can be completed by any skilled DIYer. Based on the severity of the problem the caulking that was used up may need to be removed before a fresh layer can be applied. It is crucial to keep in mind that when it is about uPVC window repairs, you should not be tempted to apply too much caulk in order to make the area harder to clean and reduce the efficiency of your energy.

Make sure that the drainage holes do not have debris in them, and also ensure that the sill pan is properly angled to allow the water to drain from the window. In more serious instances, you might have to consider replacing the window.

Other signs of long-term water leakage include sills that are rotten and the appearance of black spots of mold on the walls near the window. This fungus thrives in damp conditions and can quickly spread throughout the home.

If the leakage is occurring between the double glazing Marlow-glazed window, it is more likely the issue is more with the seal than the frame. A uPVC specialist can easily fix this issue by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or loose and open in a breeze, it may be the hinges that are at the fault. Any competent DIYer can replace the hinges in a matter of minutes.

Nearly every home in the UK will have either top hung or side-hung uPVC windows that have hinges and, like all mechanical parts, they are susceptible to wear and tear over time. Changing a window hinge is an easy process but it can be easier to do when you have a person to help you hold the frame in place.

It is also worth checking that the uPVC hinges are opening and closed in the correct direction. Look for the arrows that are on each hinge to determine which direction the window should be opened.

The problem with the hinges on windows could be the result of incorrectly opening the window in a certain way or due to improper installation in the factory. Sending us a photo via our website is often enough to resolve the problem. We are more than happy to give advice.

It is also crucial to grease the hinges regularly. Applying a light engineering lubricant on the hinges is an ideal method to accomplish this. We recommend using the lubricant that doesn't contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can help the window to operate and close more smoothly. It can also reduce the possibility of a window getting stuck and stop corrosion. This should be done at least once a year. WD40 and other solvent-based lubricants should not be used as they can damage your uPVC windows.

5. Draughts

Draughts can be caused by a variety of different things. The hinges can also be misaligned due to wear, causing gaps where the sash meets frame. These can be easily fixed by giving them a good clean, but if they are beyond repair it might be necessary to have them aligned or replaced. In addition, the interlock could be disaligned. It is located on the hinge side and might require to be cleaned. In some cases it might be necessary to replace them.

The next most common reason for draughts is window seals, these are susceptible to being worn out or damaged over time, and let air escape through the gaps. This can be avoided by replacing them with high-quality weatherstripping. Replace the windows made of Upvc with low-emissivity glass. This will help regulate indoor temperatures and lessen the possibility of draughts.

Lastly, one of the most effective ways to reduce drafts is to use an draught excluder. These are typically made of fabric which are filled with a type of filler. They can be placed on the windowsill on top. They will help stop cold air from entering and keep your home warm and cosy!

With a bit of regular maintenance and repairs, your upvc windows will provide a great level of security and insulation for your home. It is essential to remember that all windows eventually wear out and it is more cost-effective to replace them rather than repair them. If you are experiencing issues with your window repairs Rochester made of upvc it is recommended to speak with a professional as soon as possible.